Water softener salt is available in different types such as pallets, crystal, and naturally produced salt. It is advisable to use refined salts such as Diamond Crystal Bright. Use that suits your water softener. Check the manufacturer’s instructions to avoid trouble with the water softener.
Water softener comes with a wide range of functions. Salts are the primary substance in water softeners used in cleaning water.
Choosing the correct type of salt pellets is essential to make your water softener more efficient.
Expert recommends Diamond Crystal Bright and Soft Salt pellets for the Kinetico water softeners.
These crystals are made of 99.8% salt. It will be processed before turning it into a crystal to avoid any residue.
A high percentage of the dissolvable salt makes it nearly 100% water-soluble.
What kind of salt do you use in a Kinetico water softener?
The water softener owner usually is baffled when it comes to choosing the salt for the brine tank.
After your brine tank runs out of salt and needs refilling, the owner has to make a difficult decision while selecting the salt.
When the tank is running low on salt, the water condition in the tab will change. The process of refining water will reduce, and hard water will stay in its normal state when it passes through the system.
It is vital to add more salt in time to keep your water clean.
Water software salt comes in different types: Crystals, blocks, tables, rock, and pellets. However, you can choose any of them and put them in the brine tank, but it is always advisable to select the only efficient salt type according to the design of your water softener.
Every software uses some sorting mechanism to clean the water using the chlorine found in the salt. When water passes through salt, it blocks the harmful substance and only cleans water through the connected pipe.
Multiple kinds of salt types
The most common question that people ask when choosing the salt is which one is better for the water softener, solar or evaporated salt pellets?
Some may prefer using potassium chloride pellets are they are efficient in killing harmful bacteria.
Every salt has its unique quality, so before choosing a particular type of salt, you should consult with the manufacturer and see what they recommend.
Not all water software is design to support multiple kinds of salt types.
Ensuring with the manufacturer will offer you sufficient information about the salt type.
You can choose from the given option and get the perfect salt that meets the need of your water softener.
Kinetico water softener salt blocks
Kinetico water softener salt blocks come with long-lasting effects. Once you place the salt blocks in the water softener, they last for more than ten years.
The one-time investment could generate a result for the coming years. You will have peace of mind for a decade.
Many circumstances affect the efficiency of a water softener. Hardness and softness in the water depending on the region you live in some region government supply process water that will not have much contamination or hardness.
Though in the village area, the water condition changes. The hardness of water decides how much salt will be utilized in processing the water and removing the harmful substances.
Check the water hardness in your area and determine what kind of salt would be efficient for your water softener.
Kinetico water softener salt blocks are suitable for removing large materials and protecting the water from contamination.
They trap the chemicals and tiny particles and remove them before passing the water to the mainline.
Suppose you need to consult with the manufacturer before choosing the salt. Conduct the inspection to taste the water condition in your area.
Based on the inspection report, you can take advice from an expert and choose the right type of salt for your water softener.
Can I mix salt pellets and crystals?
Yes. You can use the pellets and crystals together. However, it is not advisable in the standard water softener.
They will produce a gap between the two different salt pieces giving room for water to pass quickly.
When you use a single type of salt, they pack together tightly and make it a barrier, so the water does not easily pass through from salt pieces.
It is essential to have sufficient friction between water and salt content to ensure tiny particles are held in the tank while cleaning and only cleaning water.
There is no harm in using mixed salt in a water softener. Your water softener will run smoothly with any salt type.
The only thing that matters is the efficiency of your water softener that you should consider when using the mixed salt type. Follow the manufacturer’s direction to decide what which salt type is good for you.
Is Kinetico salt-free?
Kinetico has a range of salt-free products. However, not all products are similar types.
The Kinetico team is working on a product line that uses a technique to soften and purify water without salt.
What happens if my Kinetico water softener runs out of salt?
When you find that your Kinetico water softener runs out of salt, you can restore the system by manually adding the salt and regenerating the unit.
You would need tools such as a Phillips screwdriver to open the lid and release the valve. Once you reach the inside container, find the box where salts are kept.
Ensure that you have bought the salt packets before you open the lid. Empty the salt packet in the container inside and pack the water softener again as it was before.
Run the regeneration process to remove clogging, and you will have your Kinetico water softener running as usual.
Why is my Kinetico water softener using too much salt?
Remove salt blocks from a water softener. The most common reason for using too much salt is the higher water level in the tank. Check the water level in the system.
If it is higher than indicated storage, the problem is caused by the higher water level in the water softener.
When the water level rises, too much salt gets dissolved, making the salt tank empty quickly.
Why is Kinetico water softener salt not going down?
The most common reason for water softener salt not going down is due to salt bridge.
The water softener bypassed or got clodded brine injector, making the water stuck in a water softener. Check for the blocked drain system.
The system might not move the water out due to clogging, or something stuck in the line. Another reason could be the broken parts inside the water softener.
The damaged valve may also block the flow of the water.
You might have to inspect to find the problem with your water softener. Call the repair guy to see what is happening inside the tank.