Best Water Softener Salt For Well Water (Ultimate Guide)

We use affiliate links and may receive a small commission on purchases. Read more about us

Photo of author
Written By John Roe Stephen

What Is Water Softener Salt & What Does It Do?

As we know, water softener salt is the sodium required for the ion exchange process.

The salt is stored in a tank in the system, and then when the water softens, it only remains sodium.

Also, the ion exchange process gets a place in a tank containing negatively charged resin beads.

Especially, calcium and magnesium minerals in hard water have a positive charge and are attracted to resin beads.

Resin beads facilitate ion exchange by trapping minerals and trapping them.

Once the hard resin water is filled with minerals, the water softener salt can go to work.

The saltwater, which is a positive charge, flows through the resin tank. It is released from sodium chloride and binds to the resin.

Also, it forces the calcium and magnesium ions to escape from the resin, where they are expelled from the tank system.

All that is left is sodium ions and water without calcium or magnesium: soft water.

Sodium Calcium and Magnesium do not cause any challenging water problems, and only a small amount is added to your water during the ion exchange process.

Each water contains a different amount of sodium to start with, but the amount needed for salt-based softening is based on the hardness of your water.

Thus, hard water, which has more calcium and magnesium, needs more sodium for ion exchange.

What type of well water softener salt is best?

Salt crystals

A salt crystal makes by releasing a mixture of salt, brine, and water into the air.

It evaporates water and saves 99.6 percent of sodium chloride.

This water softener salt is best suited for residents who consume less than the average amount of water or use a two-part water softener system.

Otherwise, it tends to bridge.

Solar sea salt

The evaporation of seawater produces solar sea salt, hence its name.

It is more soluble than other types of salt and is 99.5 percent pure.

It is less expensive than evaporative salts, and its high percentage of impurities prevents it from dissolving quickly in hard water.

It is best suited for homes with small water-softening needs.

Rock salt

Rock salt includes irregularly shaped pieces of salt similar to rock.

Rock salt is the chapter, and it is not as pure as other expensive salts.

It is because it contains a significant amount of calcium sulfate.

Therefore, it is not soluble in water and pure softener salts and leaves a residue in the brine basin of the softener, and should be cleaned frequently.

Evaporated salt pellets

Evaporated salt pellets are made by refining a pinch of salt into pure sodium chloride.

This process produces one hundred percent pure salt, making evaporated salt pellets the best alternative to water softeners.

The salt pellets dissolve easily in water and do not leave any impurities.

However, they are more expensive than other water softeners.

Potassium chloride

Potassium chloride is an excellent alternative to salt softeners for high blood pressure or salt-related health needs.

Potassium softens water and has the bonus of lowering blood pressure.

What Is The Best Water Softener Salt For High Iron?

Here, excellent water softener salt reviews should solve this problem because misunderstandings among consumers often arise.

Especially, water softeners can remove iron, but this is not the main purpose.

The regeneration process does not remove these iron beads effectively, which will continue to build up until you intervene.

Preventing this is not a matter of getting a better salt but getting a proper filter designed to remove what your water softener cannot.

Best Water Softener Salt For Well Water

Morton Salt 1501

Morton is a company that has contributed to making sure that converting hard water can be as easy as one might expect.

No matter how hard the salt is, it can ensure that the water is soft.

In addition to the tat, this salt is packaged in a durable bag, which means it can easily use from time to time.

Plus, its impact on hard water is significant, especially since it is made in the United States.

In the United States, many residents have this problem because they cannot deal with hard water.

So, Morton helps ensure maximum effectiveness and productivity on water hardness.

In short, you will find a great solution to the stubbornness of water, especially when you mix Morton Salt 1501.

This salt also comes at a reasonable price. So investing in it for long-term use would not be a bad idea at all.

When talking about some standard features, this water softener salt is extremely easy to use.

You open the bag, remove the salt of your choice, and pour in the hard water. That said, the water softener has multiple uses.

It also removes various equipment rust or other malfunctions.

One could say that perfectly softening the water increases the life of a device.

Apart from that, the soft water converted with this salt can use for bathing.

In fact, with convertible water, your hair and body will feel smoother than ever.

On the other hand, washing clothes with hard water is a bit of a chore.

So, Morton Salt makes sure to wash all your clothes in mild water without any hassle.

Also, it is how effective this water softener salt is.

Cargill Salt 7304

Cargill is indeed a new brand, and it is best to connect with Morton with better water quality and affordable prices.

The best water softener for sensitive skin comes in a unique package that perfectly converts hard water.

Moreover, this sat package is known for removing the bitterness of water quality at any time.

Therefore, once you get your hands on it, you will enjoy how it cleans equipment and improves its lifespan at the same time.

Other than that, Corgill Water Softener is known to be affordable compared to Morton Softener.

Therefore, people are interested in considering the above two softeners found to be extremely expensive.

However, these features are also superior to other water softeners and can easily do various laundry work.

First of all, unique diamond crystal-shaped salt pellets are better than random water softeners.

Therefore, the process of working with ionization is extremely fast when you add these tablets to hard water.

On the other hand, these salt pellets prevent equipment from rusting. Plus, there are no stains in the kitchen or laundry room, primarily if you use Cargill salt pellets.

It is no matter how hard and corrosive the water is, Cargill Water Softener never disappoints you.

So, if you either have difficulty washing clothes or dishes, you should not worry about it and pour a few drops of the water you use to make it as soft as possible.

Corgill has introduced the best salt in the market for water softeners at an affordable price compared to Morton.

Rust Out Water Softener Cleaner

Rust Out Water Softener Cleaner is specially formulated to combat the high iron content in water, remove orange stains, and create fuses, baths, toilets, and even clothing.

Rust out acts as an additive to existing water softener salts and can mix into the system by creating a solution and adding it to the brine well or placing half a cup in the well between two 40 lb softener bags.

Once added, it takes a few weeks to work on the water softener before the rust out.

The result is tubes, fuses, and sinks that no longer need to be scratched with clear water and rust cleaners.

Rust Outcomes in 22-ounce bottles and is enough for five treatments.

Morton salt 1499 clean protect

Lifting a 40-pound bag of salt once or twice a month into a three or 4-foot high brine tank is no easy task.

However, these water softeners are an excellent option for those struggling with weight bags weighing in at 25 pounds.

Besides being lightweight, each bag also contains a large handle on the top, making it easy to carry and hold for pouring.

Morton salt consists of evaporated pellets that are one hundred percent pure salt and leave little impurities to clean.

This salt can soften tough water with fewer impurities and help remove stains on fuses and zinc.

In addition, water heaters will improve their performance by removing contaminants that are difficult to heat, such as calcium nitrate.

Diamond Crystal Salt

Diamond Crystal Salt is famous for its highly pure process.

Also, it is going to replace the old water softener completely.

That being said, these water softeners are known to purify salt water as much as possible.

No matter how corrosive the water in your home is, diamond crystal salt is always a great solution for these purposes.

The main features are water purification and non-corrosion of the equipment at the same time.

However, the price tag is extremely high. That is, you have to pay the price if you want to enjoy premium hard water conversion services.

For one thing, once you invest in these water softener salts, you will be able to do your work without having to get worried about water hardening or corrosion.

Technical Specifications Salt The old water softener can be removed and easily renewed.

And also, the best water softener salts can keep rust out of various appliances.

Therefore, you can easily wash your clothes or dishes with different tools.

Apart from that, diamond stalks are also known to soften water and provide soft water for bathing.

Therefore, when you take a shower or wash your hair, you will feel more soft and supple.

Other than that, these salt flakes are almost insoluble in water.

So, the conversion process takes place, and as soon as you install these tablets, you will see an improvement in water quality.

In a nutshell, diamond crystal salt is the best investment you can make, even if it costs you twice as much as other water softeners on the market.

Morton Salt System Saver II

Another product from Morton is on the list here, as this manufacturer does the best job concerning water softener salts.

You can trust them relentlessly on their products and their efficiency.

People have been using this product for a long time and are always satisfied with its functionality.

Morton offers customers a good variety of salt products which they can choose their favorite.

Let’s take a look at some features of this Morton Salt Systems Saver II.

We often see how the quality of the product ruins by dirty packaging.

It has a hard club bag. Because of this, it is easy to handle and pour when you need it.

Its patented formula makes pills more efficient and allows the salt to do its best job caring for equipment.

It is better to disperse the accumulations to increase the lifespan of the equipment, such as many obstacles that are problematic in its operation.

Thus, it is user-friendly for people with no experience with salt pellets.

How To Add Salt To Water Softener?

When there is enough salt in the water softener tank, it will regenerate naturally; when the water flows back through the softener, it will remove the dirt and prevent rust and other tank problems.

The regeneration process usually sets up when you do not need a softener, like overnight.

Usually, it takes about ten to thirty minutes for a system to be completely redesigned.

However, if your water softener does not have enough salt, you will need to redesign the system manually.

You will need a cloth or rag for this and your salt for water softener.

Start with your brine tank and scrape off the brine and salt making from the inside of the tank using a damp cloth or rag.

Before adding more salt to the tank, make sure it is as clean as possible.

Then you need to add more water to your brine tank.

Remember to adjust your water level according to the instructions in your product manual.

Next, add salt to the brine tank.

The amount of salt you need hangs on the size of the tank in your system, but your goal is to fill the tank half full.

If your product manual does not refer to otherwise, make sure it is 3 to 4 inches above the saltwater level.

When you add salt, make sure it is loose and moves freely.

Before you put it in the tank, break up any pieces of salt that may have accumulated during storage.

Finally, locate your system control panel and press the Regenerate button manually. The system will then work regeneratively, taking 10 to 30 minutes to pass.

It would help if you did not attempt to use water from the system until the system completely rebuilds.

Although you always remember to fill your salt tank for your system’s natural regeneration, it recommends cleaning the tank regularly to ensure that your softener works effectively and lasts a long time.

Continue Reading….

Was this article heplful?

Yes No